Ultrasonic control
Flaw detectors
Ultrasonic flaw detectors
EPOCH 650
The EPOCH 650 is a conventional ultrasonic flaw detector with excellent inspection performance and usability for a wide variety of applications. This intuitive, robust instrument is a continuation of the popular EPOCH 600 error detector with additional features.
+ See more
EPOCH 6LT
The EPOCH 6LT portable ultrasonic flaw detector is optimized for one-handed operation and delivers excellent performance in rope access and high-portability applications. Lightweight with an ergonomic design, the instrument fits securely in a user’s hand or can be strapped to the leg for rope access applications.
OmniScan SX
The single group, lightweight OmniScan SX flaw detector features an easy-to-read 8.4-inch (21.3 cm) touch screen and provides cost-effective solutions. The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for P/E, P-C, or TOFD inspections.
+ See more
OmniScan X4
Detect and interpret challenging flaws and identify damage earlier with the powerful, yet portable OmniScan™ X4 multitechnology flaw detector. Exploit its versatile PA, faster TFM, innovative PCI, and efficient twin TFM/PCI to perform rapid and reliable inspections of welds and components.
+ See moreOur full range of portable ultrasonic flaw detectors (UT) provides unparalleled capabilities for locating irregularities and other material defects. A wide range of software options are available for enhanced analysis of results. We offer a wide range of measurement options specific to flaw detection applications that include the location and sizing of hidden cracks, voids, clearances and similar irregularities in welds, forgings, turbines and other structural components.
Phased array flaw detectors
OmniScan SX
The single group, lightweight OmniScan SX flaw detector features an easy-to-read 8.4-inch (21.3 cm) touch screen and provides cost-effective solutions. The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for P/E, P-C, or TOFD inspections.
+ See moreOmniScan X4
Detect and interpret challenging flaws and identify damage earlier with the powerful, yet portable OmniScan™ X4 multitechnology flaw detector. Exploit its versatile PA, faster TFM, innovative PCI, and efficient twin TFM/PCI to perform rapid and reliable inspections of welds and components.
+ See more
Focus PX
The scalable FOCUS PX acquisition unit and FocusPC software incorporate the latest phased array (PA) and conventional UT technologies for easy integration into automated and semiautomated systems. This inspection solution enables you to generate and save C-scan and A-scan raw data for applications where the verdict is based on post-inspection data analysis. This includes applications in industries such as aerospace (composite laminate), power generation (wind blade), transportation (train wheels), metal (forged parts), and more.
+ See morePhased array machines provide precise measurement with the most reliable results. Our range of phased array devices produce accurate, detailed cross-sectional pictures of internal structures at fast inspection speeds. Here you can find phased array equipment and instruments including flaw detectors, scalable acquisition units, and phased array inspection software to work alongside your phased array device. These powerful tools allow you to complete even the most demanding inspections with confidence, offering precise data acquisition, visualization and analysis of ultrasonic signals. Our phased array equipment and phased array software solutions are fully integrated, with fast calibration and streamlined user interfaces so you can complete your setup and inspection in minimal time.
Bond testing
Bond Master 600
The portable BondMaster 600 delivers a powerful combination of multimode bond testing software and highly advanced digital electronics for the nondestructive inspection of honeycomb and laminate composites and metal-to-metal bonds.
+ See moreOur complete line of bond testing (BT) flaw detectors provides unmatched capabilities for the location of discontinuities and other flaws in composite structures. We offer a wide range of measurement features and application-specific options for flaw detection. Some of the primary applications include the location, identification and sizing of dis-bonds, delamination, and repair (putty) areas of honeycomb composite and composite laminates in aircraft structures(wings and flaps), high-performance racing vehicles, and boat hulls.
Thickness Gauges
Ultrasonic thickness gauges
27MG
The 27MG basic ultrasonic thickness gauge is designed to make accurate measurements from one side on internally corroded or eroded metal pipes and parts. It is lightweight, durable, and ergonomically designed for easy, one-hand operation.
+ See more
45MG
The 45MG advanced ultrasonic thickness gauge is packed with standard measurement features and software options. This unique instrument is compatible with the complete range of Olympus dual element and single element thickness gauge transducers.
+ See more
39DL PLUS™
The versatile 39DL PLUS™ gauge can be used with dual element transducers for the measurement of corroded pipes to the very precise thickness measurements of thin or multilayer materials with a single element transducer.
+ See more
72DL PLUS™
The 72DL PLUS™ advanced ultrasonic thickness gauge delivers precision thickness measurements at high speed in a portable, easy-to-use device. Compatible with single element transducers up to 125 MHz, this innovative instrument is ideally suited to measure the thickness of ultra-thin materials, including multilayer paint, coatings, and plastic. It can simultaneously display the thickness of up to 6 layers.
+ See moreEvident is a leading source of ultrasonic thickness gauges for the accurate measurement of many types of material.
Our digital thickness gauges offer a range of features for advanced performance. Explore different options to suit your application needs, from simple handheld gauges to advanced models. All Olympus ultrasonic thickness gauges can measure thickness from one side of a part. An ultrasonic thickness gauge can measure most engineering materials, including plastics, metals, metal composites, rubber, and internally corroded materials. Olympus is also a leading manufacturer of Hall-effect thickness gauges, which are ideal if you’re looking to achieve fast, precise, and accurate measurements on nonferrous or thin materials, such as plastic bottles.
Electromagnetic thickness gauges
Magna-Mike 8600
The Magna-Mike® 8600 is a portable thickness gauge that uses a simple magnetic method to make reliable and repeatable measurements on nonferrous materials. Operation of the Magna-Mike is very simple. Measurements are made when its magnetic probe is held or scanned on one side of the test material and a small target ball (or disk or wire) is placed on the opposite side or dropped inside a container. The probe's Hall Effect sensor measures the distance between the probe tip and target ball. The measurements are instantly displayed on the large color thickness display as an easy-to-read digital thickness reading.
+ See moreScanners
NDT industrial scanners can be used across a wide range of industrial applications to improve speed, data quality, and the probability of detection (POD). We offer industrial scanners with one or two axes (XY) in both motorized and semiautomated (manual) versions. Our weld inspection scanners can hold multiple probes, enabling multi-technology inspection with an improved POD.
Our corrosion inspection scanners are used on pipes or flat surfaces in conjunction with the HydroFORM™ scanner, flexible phased array probes, or Dual Linear Array™ probes, while our aerospace scanners are made to hold onto composite surfaces. To complete your inspection solution, Olympus offers many phased array probe and wedge models as well as accessories, such as pulser-receiver preamps, adaptors, and water pumps.
Weld inspection scanners
AxSEAM
The semiautomated AxSEAM™ scanner eases long seam weld inspection in pipes. Monitor scan speed and couplant loss and start the data acquisition in the OmniScan™ unit on the ScanDeck™ Module. Easily adjustable probe holders support 4 probes, enabling PA, TOFD, and TFM inspection.
+ See more
SteerROVER
The SteerROVER is a fully automated, steerable motorized scanner capable of performing weld inspection in remote locations. It can mount phased array as well as TOFD-P/E probes for inspection of circumferential or longitudinal welds.
+ See more
WeldROVER™ Skener
The WeldROVER scanner is designed to make fast, efficient phased array inspections on ferromagnetic piping or vessel girth welds and long seams with minimal training and setup time.
+ See more
HST-Lite Skener
The new HST-Lite scanner is the perfect choice for cost-effective, one-channel TOFD inspections when signal quality is important. The combination of magnetic wheels and spring-loaded probe holders offer the stability required to perform high quality, one-line inspections. The scanner can be operated using only one hand, and will attach to ferromagnetic surfaces even when in an upside-down position.
+ See more
Mini-Wheel Encoder
The mini-Wheel Encoder is used for the positioning and dimensioning of defects in the scan axis. It can synchronize data acquisition with probe movement. It is also waterproof and compatible with Olympus standard PA wedges.
+ See more
COBRA Scanner
The COBRA manual scanner combined with OmniScan X3 flaw detector is used to perform circumferential weld inspection on small-diameter pipes. The COBRA can hold two PA probes to inspect pipes with OD ranging from 0.84 to 4.5 in.
+ See more
HSMT-Compact Scanner
The HSMT-Compact is a manual one-axis encoded scanner. In particular, it is light and small, and also versatile. It can be used (with up to 4 probes) on plates and for circumferential scans on pipes as small as 4.5 in. OD pipes.
+ See more
HSMT-Flex Scanner
The HSMT-Flex is intended for manual one axis encoded inspection of circumference welds on pipes of 4.5 in. OD and greater. The scanner can be fitted with up to 8 probes using optional probe holders, thanks to its capacity to bend in the center.
+ See more
HST-X04
The Evident HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, low-cost, and versatile weld inspection solution.
+ See more
VersaMOUSE Scanner
The VersaMOUSE™ is a scanner designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2-D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE can perform an encoded one-line scan, followed by indexing of the position in the perpendicular direction. Another one-line scan can then be performed and juxtaposed to the previous scan. This process is repeated to produce a complete 2D map of the area of interest.
+ See moreOlympus has a wide range of scanners to address fabrication or maintenance weld inspections needs. We have solutions for small pipes up to flat plates with the capacity to hold multiple probes for complete weld volume coverage. Whether you choose a motorized or manual option, our scanners offer versatility, dependability, and repeatability.
Corrosion inspection scanners
FlexoFORM
The innovative FlexoFORM scanner makes challenging pipe elbow corrosion inspection easier. The scanner's flexible phased array technology makes it possible to use a single probe to cover the entire range of pipe elbow diameters.
+ See moreSteerROVER
The SteerROVER is a fully automated, steerable motorized 2-axis scanner capable of performing corrosion mapping in remote locations. When combined with the HydroFORM or the DLA phased array corrosion mapping solutions, it is a powerful tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.
+ See more
MapSCANNER
The MapSCANNER is a semiautomated, 2-axis corrosion inspection scanner. When combined with the HydroFORM or Dual Linear Array (DLA) phased array corrosion mapping solutions, it is a powerful, efficient tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.
+ See more
MapROVER
The MapROVER is a fully automated, motorized 2-axis corrosion mapping scanner. When combined with the HydroFORM phased array corrosion mapping solution, it is a powerful tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.
+ See more
HydroFORM/RexoFORM Scanners
By bringing a semiautomated phased array solution into the corrosion inspection market, Olympus has not only introduced a new technology, but also a new world of possibilities. Say goodbye to unsafe and unreliable motorized rastering of small UT probes; phased array probes cover a larger surface, and can be manually traveled at a safe speed. This solution enables inspectors to be more productive and collect higher resolution data.
+ See more
ChainSCANNER
The ChainSCANNER provides a manual pipe-inspection solution for pipes between 1.75 to 38 in. OD. The scanner, held by chain links instead of magnetic wheels is well suited for weld or corrosion inspection on different type of materials. UT, TOFD, PA.
+ See more
GLIDER Scanner
The GLIDER scanner is a 2-axis (X-Y) encoding scanner for the manual inspection of slightly curved or flat composite surfaces. The scanner, held by suction cups is well suited for raster scanning. Technologies: ECA, EC, UT, PA.
+ See moreVersaMOUSE Scanner
The VersaMOUSE™ is a scanner designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2-D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE can perform an encoded one-line scan, followed by indexing of the position in the perpendicular direction. Another one-line scan can then be performed and juxtaposed to the previous scan. This process is repeated to produce a complete 2D map of the area of interest.
+ See moreMini-Wheel Encoder
The mini-Wheel Encoder is used for the positioning and dimensioning of defects in the scan axis. It can synchronize data acquisition with probe movement. It is also waterproof and compatible with Olympus standard PA wedges.
+ See moreCorrosion mapping is a highly demanding application that requires the capability to precisely encode the probe’s position in up to two axes. The scanners can be mounted on pipes and flat surfaces and are easy to use for fast detection of defects from manufacturing-induced lamination to in-service wall thickness reduction.
Aerospace / wind blade inspection scanners
RollerFORM
The RollerFORM™ and RollerFORM XL wheel probes provide high-quality, immersion-like phased array ultrasonic testing of composite materials, such as those used in aerospace components and wind turbine blades. An affordable replacement for full 2D encoding systems, RollerFORM scanners offer a viable alternative to immersion techniques.
+ See moreMini-Wheel Encoder
The mini-Wheel Encoder is used for the positioning and dimensioning of defects in the scan axis. It can synchronize data acquisition with probe movement. It is also waterproof and compatible with Olympus standard PA wedges.
+ See moreGLIDER Scanner
The GLIDER scanner is a 2-axis (X-Y) encoding scanner for the manual inspection of slightly curved or flat composite surfaces. The scanner, held by suction cups is well suited for raster scanning. Technologies: ECA, EC, UT, PA.
+ See moreVersaMOUSE Scanner
The VersaMOUSE™ is a scanner designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2-D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE can perform an encoded one-line scan, followed by indexing of the position in the perpendicular direction. Another one-line scan can then be performed and juxtaposed to the previous scan. This process is repeated to produce a complete 2D map of the area of interest.
+ See moreInspecting large areas with fast C-scan acquisition is a critical feature for the aerospace industry. Scanners with suction cups are well suited to holding onto composite surfaces, so you can perform mapping with up to two precise encoded axes.
Probes and transducers
Ultrasonic transducers
Evident ultrasonic probes and transducers are used for flaw detection, thickness gauging, materials research, and medical diagnostics. Our more than 4,000 transducer types include contact, dual element, shear wave, delay line, and immersion. If you don’t find what you’re looking for in our transducer catalog, we can create custom and special designs.
Phased array probes
Olympus offers a wide variety of phased array (PA) probes using piezocomposite technology for all types of phased array ultrasonic testing (PAUT) inspections. The standard Olympus PA probes featured here are divided into three types:
- Angle beam probes
- Integrated wedge probes
- Immersion probes
Other types of probes can be designed to suit the needs of your application. Ultrasonic testing using phased array probes is fast becoming the preferred NDT method because it is efficient, reliable, and safer than some alternative methods. Linear arrays are the most commonly used phased array probes for industrial applications. One important feature that defines phased array probes is the active probe aperture (the total length of the elements in the active plane). From dual array probes for welding to PA probes for corrosion, each option provides fast scan speeds, sharp imagery, and accurate testing results.